Hondo Garage Perfect Squeeze Mount
RKA Highly recommends this product
Contact them at
https://shop-hondogarage.com/



Image Description Price


The Perfect Squeeze

Use this one to mount directly to our RKA Dashboard, or a flat surface.

Hondo Garage designed the Perfect Squeeze phone mount for off-road motorcycle riders and racers who want to use their phones as a GPS. You can ride the track or the gnarliest washboard and your phone won't budge, but when you stop for lunch it's easy to pop your phone in and out. It's is made from precision-machined aluminum and stainless steel, and it works with almost any phone and any case.
Perfect Squeeze NO MOUNT
MSRP
$85.00


The Clamp

Easy Mounting Close to the bar

These all-metal bar clamps slide into the dovetail on the bottom of our Perfect Squeeze Phone Mount. Parallel clamping mechanism make mounting a breeze as nothing needs to be wrapped around the bar. Designed to work with any handlebar out there, even small diameter crossbars.

Allows for mounting in either portrait or landscape orientation.

Compatible with our Perfect Squeeze phone mount or Big Squeeze tablet mount.

Perfect Squeeze
Clamp
MSRP
$39.00


The Bundle

Use this one to mount on your handlebars or any tubular part

Hondo Garage designed the Perfect Squeeze phone mount for off-road motorcycle riders and racers who want to use their phones as a GPS. You can ride the track or the gnarliest washboard and your phone won't budge, but when you stop for lunch it's easy to pop your phone in and out. It's is made from precision-machined aluminum and stainless steel, and it works with almost any phone and any case.
Perfect Squeeze Bundle
including Clamp mount.
$118.00



Big Squeeze Tablet Mount

Use this one to mount directly to our RKA DAshboard,
or a flat surface.
Hondo Garage designed the Big Squeeze with one objective in mind: Hold any device in any terrain. And by hold we mean hold steady, without wobble, without constant readjustments. Just rock-solid holding power for folks who need to read their map while skipping through whoops or getting rattled over nasty washboard. It will hold everything from a small phone to a full-sized iPad and doesn't need any sort of special case to do it.

  • Clamps any device from .75" to 8"
  • Holds steady in the roughest terrain
  • Insert and remove devices with one hand
  • Machined out of aluminum and stainless steel
MSRP
$99.00


Big Squeeze Tablet Mount BUNDLE

Use this one to mount on your handlebars or any tubular part

Hondo Garage designed the Perfect Squeeze phone mount for off-road motorcycle riders and racers who want to use their phones as a GPS. You can ride the track or the gnarliest washboard and your phone won't budge, but when you stop for lunch it's easy to pop your phone in and out. It's is made from precision-machined aluminum and stainless steel, and it works with almost any phone and any case.

Perfect Squeeze Tablet
Bundle including Clamp mount.
MSRP
$132.00


Perfect Squeeze JUICED

Simply put, this is the best off-road phone mount and wireless charger you can buy.

Hondo Garage designed it specifically for off-road motorcycle riders and racers who want to use their phones as a GPS. You can ride the track or the gnarliest washboard and your phone won't budge, but when you stop for lunch it's easy to pop your phone in and out.
The clamping mechanism doesn't rely on springs. It's more like a tiny vice that locks securely to your phone. A ball detent prevents loosening from vibration.
The Perfect Squeeze is made from precision-machined aluminum and stainless steel, and it works with almost any phone and any case.
The wireless charger was developed in collaboration with Moto Power Puck. We embed the MPP circuit board in a waterproof, vibration-proof housing designed for extremely harsh environments (like motorcycle handlebars and race truck dashboards).

New V2 Fast-Charge Puck

  • 10W Fast Charging:  This is the same as plugging your phone into a 2A (Fast) wall charger.  No matter how many apps you run and how bright your display is set, its going to be a challenge to run your battery to empty.
  • Waterproof Quick Disconnect: Lots of people own multiple bikes and would love to use their wireless charger on all of their rides.  With the quick disconnect, you can quickly move your entire mount and charger from bike to bike or bring it in at the end of the day.
  • In-line fuse:  We’ve included an inline 3A fuse, just in case the worst would happen.  Really…can you have too many fuses?
  • Heavier gauge wire:  We used a beefier 20 gauge cable with a single red and black within the casing to aide in the simplicity of wiring the MotoFastPuck
MSRP
$179.00


Juicer - Wireless Charging Upgrad

Add an extremely rugged wireless charging solution to your existing perfect Squeeze phone mount. Bolts on for a robust installation that won't let you down, even in the roughest terrain.

Our wireless charger was developed in collaboration with Moto Power Puck. Hondo Garage embed the MPP circuit board in a waterproof, vibration-proof housing designed for extremely harsh environments (like motorcycle handlebars and race truck dashboards).

New V2 Fast-Charge Puck

  • 10W Fast Charging:  This is the same as plugging your phone into a 2A (Fast) wall charger.
    No matter how many apps you run and how bright your display is set, its going to be a challenge to run your battery to empty.
  • Waterproof Quick Disconnect: Lots of people own multiple bikes and would love to use their wireless charger on all of their rides.  With the quick disconnect, you can quickly move your entire mount and charger from bike to bike or bring it in at the end of the day.
  • In-line fuse:  We’ve included an inline 3A fuse, just in case the worst would happen.  Really…can you have too many fuses?
  • Heavier gauge wire:  We used a beefier 20 gauge cable with a single red and black within the casing to aide in the simplicity of wiring the MotoFastPuck
MSRP
$98.00


Buzz-Kill Vibration Isolator

A must-have for thumpers.

Single-cylinder bikes like to vibrate. And that vibration can kill the image-stabilization mechanism in your phone's camera. Our Buzz-Kill vibration isolator fixes this problem by damping out those camera-killing vibrations.

It's based on a mechanism called a wire-rope isolator that uses stranded stainless steel wire to convert vibrational energy into heat (not enough for you to feel though). The beauty of this design is that it's incredibly rugged, as it's made entirely out of aluminum and stainless steel. No rubber to degrade over time.

The Buzz-Kill bolts to the back of our Perfect Squeeze phone mount and is compatible with ourLow-Profile bar clamps (requires the Portrait Adpater Plate), RAM ball and socket accessories, or can be bolted right to a dash plate.

NOTE: If you have an older version of the Perfect Squeeze that has the dovetail machined right into the base, you'll need to upgrade to our current version of the Perfect Squeeze in order to use the Buzz-Kill. Due to the weight of a tablet, the Buzz-Kill will not work with our Big Squeeze tablet mount. For use with the Perfect Squeeze only.

MSRP
$39.00


Bar-Tab Mount for Perfect Squeeze

The Bar-Tab is a slick way to mount your Perfect Squeeze phone mount to your motorcycle's handlebars. It'll work with any bike that has an M8 bar clamp bolt (most of them.) Especially useful on bikes that have a mono top clamp that covers the bars like the ones Highway Dirtbikes makes.

The Bar-Tab bolts to two of the AMPS mounting holes on the Perfect Squeeze, which means you can run it in the top two or the bottom two, and sticking out to the right or the left to achieve different mounting positions.

Includes the Bar-Tab mount, two stainless 10-32 SHCS, and three different lengths of M8-1.25 handlebar bolt (45mm, 50mm, and 55mm).

MSRP
$17.00

 
Visit our

Join us on

Join us on


This is a must read.
The Bible, Holy Grail,
The Zen of motorcycle articles
An article by
"Nick Ienatsch"
Writer, Racer, Announcer,
READ

THE PACE