Kawasaki ZX9 Tankbag Instructions

Click photo for larger image
The correct installation of your RKA tankbag is very important. If you will take a few minutes to follow these instructions you will very happy with the out come.

Tools required : 10mm socket


Click photo for larger image
Loop the webbing around the intake scoop housing (Not the plastic), on the left side as shown.

Snug down the webbing. Making sure you will not have any pressure on any other bendable or moving parts. As shown.

Repeat on the right side.


Click photo for larger image
Remove the seat. using a 10mm socket or open end wrench.

Click photo for larger image
 Remove the seat. using a 10mm socket or open end wrench.
Click photo for larger image Loop the webbing around the tab that the seat slides onto.

This is a photo of the ZX6 underseat area, the look is almost exactly the same for the 9.