Kawasaki ZX6 Tankbag Instructions

Click photo for larger image
The correct installation of your RKA tankbag is very important. If you will take a few minutes to follow these instructions you will very happy with the out come.

Tools required : Phillips screw driver, 10mm socket


Click photo for larger image
Remove the screw holding the left intake cover shown above.

Left up the cover and loop the webbing around the intake scoop housing (Not the plastic).

Snug down the webbing. Making sure you will not have any pressure on any other bendable or moving parts. As shown.

Replace the intake cover


Click photo for larger image
Remove the screw holding the right intake cover shown above.

Click photo for larger image
 Left up the cover and loop the webbing around the intake scoop housing (Not the plastic).

Snug down the webbing. Making sure you will not have any pressure on any other bendable or moving parts. As shown.

Click photo for larger image Replace the intake cover

Click photo for larger image
Remove the seat. using a 10mm socket or open end wrench.

Click photo for larger image
Loop the webbing around the tab that the seat slides onto.

Make sure the webbing goes under the gas tank hose as shown.