Honda 929 Tankbag Instructions
 Fig 1. Click photo for larger image
The back strap is easy.
Remove seat loop webbing around seat tab.
Reinstall seat.
 Fig 2. Click photo for larger image
 Left and right side instructions are the same.
Start by removing this phillips head screw.
 Fig 3. Click photo for larger image
 Then remove the two allens as shown.
 Fig 4. Click photo for larger image
 Pop out small tab screw.
 Fig 5. Click photo for larger image
Remove rubber trim from under tank and intake cover
 Fig 6. Click photo for larger image
  Pull plastic intake cover out.
 Fig 7. Click photo for larger image
Loop the webbing around the intake, adjusting it ALL the way to the frame, putting the pressure on the metal ring that the intakes are attached to.
 Fig 8. Click photo for larger image
Replace the plastic intake covers and the rubber trim
 Fig 9. Click photo for larger image
 This is how it should look when finished.
Left side.
 Fig 10. Click photo for larger image
 This is how it should look when finished.
Right side.
 Fig 11. Click photo for larger image
Adjust the webbing to your liking and you are done,
Down the road,
Finished.
 Fig 12. Click photo for larger image
 16 liter SuperSport
Fig 13. Click photo for larger image
SuperSport Mini eXpandable
Fig 14. Click photo for larger image
SuperSport Mini eXpandable