Honda ST1300
Tankbag attachment instructions
This procedure is fairly simple.
One strap attaches under the seat at the back of the gas tank. The two front straps attach to the bracket at the front of the tank.
Remove the seat, loop strap around seat post, re-install seat.
Back strap done,
15 seconds tops :-)
Front straps are just as easy following these instructions. It's not needed but you can use a zip tie for a helper if you want. Push the zip tie throught the webbing and use it as a guide.
On the left side, string the webbing around the bar at the front of the tank, loop it and snug down.
Repeat on the right side, string the webbing around the bar at the front of the tank, loop it and snug down.
Adjust / position the webbing to your liking.